Splice Cabinet 
• Modular Solution – Easier and Faster Installation
• High Density, Reduced Floor Space Usage, Reduced Costs
• Total Front Access Frame – Easier and Faster Maintenance
• Superior Cable Management – Protects Fibers and Ensures network performance and reliability
• Completely Enclosed and Lockable – Increased Security
 
 
Optical Raceway 
• Quick & Easy Installation
• New Drops To Be Added Or Removed Quickly & Easily
• Features 38 Support Structures, Over 75 Fittings
• Two-inch Minimum Bend Radius Is Maintained Throughout The System Regardless Of The Raceway Size
• 100% Raceway Reliability—Stands Up To Any Challenge
 
Building Distribution Enclosure 
• Designed to operate in category C (controlled), category G (outdoor ground level) and category A (aerial) as characterized by IEC 61753-1
• Fire retardant, LSZH materials
• UV stable material for outdoor above ground use
• Multiple cable ports available
• Bottom cable seal blocks are wrap-around
• Allows integration of passive optical components
• Small and large footprints
• Multiple accessories available to terminate and seal different cable types
• Removable enclosure lid
• QUAREO Scan Assist compatible
 
Termination Block 
• Designed to operate in category C (controlled), category G (outdoor ground level) and category A (aerial) as characterized by IEC 61753-1
• Connections are hard wired – no permanent patch cords or jumper cables required
• Secure, reliable, high performance infrastructure from switch to work area, or PABX to telephone
• Modules are patched or jumpered by exception only
• Silver-plated, proven LSA-PLUS contact principle
• Punch-down connectivity for fast and easy installation
• Gas-tight contacts ensure reliable and long lasting connections
 
Termination/Splice Fiber Panel 
• Designed to operate in category C (controlled), category G (outdoor ground level) and category A (aerial) as characterized by IEC 61753-1
• A cost-effective, space-saving alternative to splicing on the fiber frame
• Equipped with splice drawers and available in several configurations
• The FEC’s largest configuration accommodates up to 864 stranded fibers or 2,592 ribbon fibers, with each splice drawer supporting 24 stranded fibers or 72 ribbon fibers
• Bend radius protection and discrete subunit routing paths ensure easy access and prevent excess attenuation
• This cabinet accommodates a wide variety of cable types and splicing methods
 
Universal Connectivity Platform
• Multi-media Quick-Fit configurations accommodate both copper and fiber Compatible with MPOptimate multimode (OM3/ OM4) & singlemode (OS1/OS2) fiber media
• Compatible with U/UTP, F/UTP and S/FTP copper media
• Can be installed inside a cabinet/rack, to a wire basket or under a raised floor
• Scalable to meet all applications from 100 Mbps to 100 Gbps including high-density 10 Gbps deployments  
 
 
 
 
Pre-Terminated Fiber Optic Solutions
• More agile – Low loss connectivity means greater flexibility in cross-connections
• More available – Modular cassettes remove trunk connectivity gender issues, saving design, install, and maintenance time
• More efficient – High-density connectivity and reduced cable volume saves space throughout the data center
• A modular system of cassettes, fiber trunks, patch-cords, and mounting hardware
• Universal Connectivity Platform (UCP) – Part of the Mixed Media Platform, the UCP allows convergence of copper and fiber without compromising good cabling design and practice. Ideal for top of rack and cabinet applications
 
 
Pre-Terminated Cabling Solution 
• Fully supports VoIP, Gigabit or 10 Gigabit Ethernet and POE
• High density, high performance – 1Gb/s and 10Gb/s
• Pre-terminated, factory tested, reduced TCO (Total Cost of Ownership)
• Reduces migration and maintenance time
• Improves airflow and cooling concepts
• Comprises trunks, panels and UCP footprint cassettes
 
 
Optical Raceway 
• Qualified Against TIA-568-C Augmented Category 6 & ISO 11801 Class EA specifications
• Overall Foil Shield
• AWG 23 Solid Conductor
• LSZH Sheath
• Transmission Performance Parameter to 500MHz
• Guaranteed 10Gbps Performance to 100meters
 
High-Density Fiber Panel
• Support IEEE 802.3ae, IEEE 802.3ba, IEEE 802.3z
• Exceed ANSI/TIA-568-C.3 and ISO 11801 Edition 2 cabling system requirements
• OM3/OM4 and OS2
• 19-Inch rack mountable
• Available in 1, 2, and 4 RU Chassis
• 48 Fiber (24 Duplex LC) LC-to-LC or LC-to-MPO Blade
• 192 Fiber (16 Port) MPO-to-MPO Blade  
 
 
Angled or Flat Fiber Panels
• Multi-media Quick-Fit configurations accommodate both copper and fiber
• Compatible with MPOptimate multimode (OM3/OM4) and singlemode (OS1/OS2) fiber media
• Compatible with U/UTP, F/UTP and S/FTP copper media
• Can be installed inside a cabinet/rack, to a wire basket or under a raised floor
• Scalable to meet all applications from 100 Mbps to
• 100 Gbps including high-density 10 Gbps deployments  
 
 
Copper Patch Panel
• Accepts AMP-TWIST, Shielded & Unshielded SL Series Jack & Inserts
•May Be Used To Create Custom Configurations – Including Mixing Fiber, Twisted-Pair, Coax & A/V Applications
•Ports May Be Individually Replaced
• 1RU & 2RU
•Angled Versions Allow Elimination Of Horizontal Cable Management For Higher Rack Densities & Ease Of Cable Dress
 
 
Direct Attach Cable (DAC)
• High Density & High Speed
• Passive & active copper assemblies
• Low cost alternative to Fiber Optic assemblies
• Low Power Consumption  
 
 
 
Managed Fiber Panel
• Support IEEE 802.3ae and IEEE 802.3ba (10-40-100 GB/s)
• Exceeds ANSI/TIA-568-C.3 and ISO 11801 Edition 2 cabling system requirements
• OM3/OM4 and OS1
• 19-Inch rack mountable
• Available in 2, 4, and 8 slot chassis
•48 Fiber (24 Duplex LC) LC-to-LC or LC to MPOptimate blade
• 192 Fiber (16 MPO Ports) MPO-to-MPO blade
• 1, 2 & 4RU chassis  
 
 
Sigma
• 2 – 90 m bundles of 6 spiral-taped copper cables
• 6 port Quick-Fit housings compatible with UCP modular panels system
• Housing to Housing version features integrated Plastic Optical Fiber (POF) for easy tracing of far ends
• Housings-to-plugs and Housings-to-jacks versions available  
 
 
MPOptimate Fibre Optic System
• Up to 6 Cassettes Per Link For 10 Gb/s
• Ready For Migration To 40 & 100Gb/s
• Full 300 Meter Support On OM3 Fibers & 550 Meter On OM4 Fibers
• Label Space On Each Cassettes
• Pre-terminated Factory Tested System
• High Density, Up To 96 Ports On 1U
•Maximum Cassette Insertion Loss < 0.35dB
• Minimum Return Loss MPO > 27dB, LC/SC > 35dB
• All connectors meet IEC 61755-3 series end face  
 
 
 
MPOptimate Pre-terminated Trunks
• Loose Tube Cable Construction, Ideal for Cable Tray Or Raceway
• Cable Terminated With Low loss 12 Fiber MPOptimate Connectors
• Terminated With Female MPO Connectors (Male Versions On Request)
• OM3, OM4 or OS2 Cable Performance, LSZH Construction
• Factory pre-terminated assemblies
• All Cords With Protocol, constant & Reliable Quality
• Available in 12, 24 & 48 Fiber (Other Fiber Counts on request)  
 
 
Patch Cord
• Construction Suited To Inter-cabinet patching
• Low loss MPOptimate 12 fiber MPO round Cable Patch Cord
• Terminated With Male And/Or Female MPOptimate Connectors
• OM3, OM4 or OS2 Cable Performance, LSZH Construction
• Connector Performance For OM3/OM4: IL ≤ 0.35 dB (max.); RL ≥ 28 dB
• Connector Performance for OS2: IL ≤ 0.6 dB (max.); RL ≥ 45 dB
• Available In Different Lengths
• Available In Female/Female & Male/Female Version In Straight & Total Flipped Wiring
 
 
MPOptimate Cassette (10Gb/s)
• Quick-Fit design, fits in all UCP products
• OM4 bend insensitive fiber
• For channel with 40G MPO cassettes connected to 40G (4x10G) transceiver
• Cassette attenuation: typical 0.25dB/max. 0.35dB
• Cassette Return Loss: 27dB min  
 
 
Storage Area
• Reduce SAN switch cabling volume by up to 80%
• Implement high-density deployment with fewer cabinet or infrastructure upgrades
• Reduce space requirements by managing up to 768 fiber ports within 2 rack units
• Easily access ports
• Speed up deployment and reduce connection errors with color-coded and keyed connections
• Simplify installation, upgrades and migration with dedicated linecard kits  
 
 
 
 
 
 
 
Optical Distribution Frame
• Easy access to all cables and connectors for rapid routing and connection, turn-ups, and maintenance
• Reduced bend-radius fiber lowers attenuation caused from tight bends and frequent handling
• MPO module accepts LC-24 or SC-12 connectors and features a low-loss MPO connector for easy connections
• Build-as-you-grow fiber capacity
• Available featuring Quareo technology